Skip to content
WatchtheDetails

Movement · ETA · automatic

ETA 2824-2 movement

ETA 2824-2 is an automatic movement by ETA: 25.6 mm1 across, 4.6 mm1 high, 251 jewels, beating at 28,800 bph1, 42 h1 of power reserve.

Sources checked · How we source numbers
ETA 2824-2: movement drawingETA 2824-2, dial side, to scale: movement diameter 25.6 mm; size 11½‴; height 4.6 mm; hour, minute, second hand hole Ø — (unknown).movement Ø 25.611½‴ as printed · Ø 25.6 = 11.35‴4.6SIDE · SECTION · height 4.6Ahour, minute, second hand hole Ø —DETAIL A · 10:1
ETA 2824-2, dial sideDrawing from data, not a photo · mm

ETA 2824-2 at a glance

Diameter
25.6 mm1
Height
4.6 mm1
Jewels
251
Beat rate
28,800 bph1
Power reserve
42 h1
Lift angle
50°1

New to the terms? Read quartz vs automatic or watch movement types.

Setting and servicing the ETA 2824-2

The figures a watchmaker or a timegrapher needs for the ETA 2824-2, as ETA prints them.

Lift angle
50°1
Power reserve
42 h1
  • The ETA c07-611 is based on the ETA 2824-2[2](secondary source).
  • The Powermatic 80 is based on the ETA 2824-2[3].
  • The Pt PT5000 is a clone of the ETA 2824-2[4](secondary source).

Same family at ETA

How each differs from the ETA 2824-2, worked out from the figures on its own page.

What can replace the ETA 2824-2

7 calibres of the ETA 28xx and Sellita SW200 / SW300 group checked against the ETA 2824-2: diameter, height, hand holes, date window, crown and dial feet. A verdict marked “not confirmed” lacks one of those figures for the ETA 2824-2 or the other calibre.

Not published, so not checked in several comparisons:

  • hand holes for ETA 2824-2, ETA 2836-2, ETA 2892-A2, ETA 2893-2, SW220-1, SW300-1 and SW330-2
  • crown position for ETA 2824-2, SW200-1, ETA 2836-2, ETA 2892-A2, ETA 2893-2, SW220-1, SW300-1 and SW330-2
  • dial feet for ETA 2824-2, ETA 2836-2, ETA 2892-A2, ETA 2893-2, SW220-1, SW300-1 and SW330-2

  1. ETA 2824-2 → SW200-1

    Drop-in· not confirmed
    • =diameterSW200-1’s casing diameter matches ETA 2824-2’s movement diameter: 25.6 mm.
    • =heightSame height: 4.6 mm.

  2. ETA 2824-2 → ETA 2836-2

    Fits with changes· not confirmed
    • =diameterSame movement diameter: 25.6 mm.
    • ≠heightETA 2836-2 is 0.45 mm taller (5.05 mm vs 4.6 mm): check the room under the crystal and the case back; the hands sit higher.

  3. ETA 2824-2 → ETA 2892-A2

    Fits with changes· not confirmed
    • =diameterSame movement diameter: 25.6 mm.
    • ≠heightETA 2892-A2 is 1 mm thinner (3.6 mm vs 4.6 mm): the dial and hands sit lower, so a spacer or a different stem height may be needed.

  4. ETA 2824-2 → ETA 2893-2

    Fits with changes· not confirmed
    • =diameterSame movement diameter: 25.6 mm.
    • ≠heightETA 2893-2 is 0.5 mm thinner (4.1 mm vs 4.6 mm): the dial and hands sit lower, so a spacer or a different stem height may be needed.

  5. ETA 2824-2 → SW220-1

    Fits with changes· not confirmed
    • =diameterSW220-1’s casing diameter matches ETA 2824-2’s movement diameter: 25.6 mm.
    • ≠heightSW220-1 is 0.45 mm taller (5.05 mm vs 4.6 mm): check the room under the crystal and the case back; the hands sit higher.

  6. ETA 2824-2 → SW300-1

    Fits with changes· not confirmed
    • =diameterSW300-1’s casing diameter matches ETA 2824-2’s movement diameter: 25.6 mm.
    • ≠heightSW300-1 is 1 mm thinner (3.6 mm vs 4.6 mm): the dial and hands sit lower, so a spacer or a different stem height may be needed.

  7. ETA 2824-2 → SW330-2

    Fits with changes· not confirmed
    • =diameterSW330-2’s casing diameter matches ETA 2824-2’s movement diameter: 25.6 mm.
    • ≠heightSW330-2 is 0.5 mm thinner (4.1 mm vs 4.6 mm): the dial and hands sit lower, so a spacer or a different stem height may be needed.

All ETA 2824-2 figures

Every figure we hold for the ETA 2824-2, with its source. Where sources disagree, each value is shown.

Size

Size in lignes
11½‴1
Diameter
25.6 mm1
Height
4.6 mm1

Running

Jewels
251
Beat rate
28,800 bph1
Power reserve
42 h1

Accuracy and care

Lift angle
50°1

Not published yet

  • Hands and functions: not published by ETA
  • Accuracy (maker): not published by ETA
  • Hacking seconds: not published by ETA
  • Hand holes: not shown: ETA keeps its drawings confidential
  • Dial feet: not shown: ETA keeps its drawings confidential
  • Do not set the date: not published by ETA

ETA 2824-2 questions

What is the lift angle of the ETA 2824-2?

50°, as ETA prints it. Enter 50° on a timegrapher to read amplitude correctly for the ETA 2824-2.

Source [1]

How long does the ETA 2824-2 run when fully wound?

About 42 h from a full wind, per ETA.

Source [1]

What can replace the ETA 2824-2?

From the published figures, the closest is the SW200-1: drop-in, not confirmed for every part. SW200-1’s casing diameter matches ETA 2824-2’s movement diameter: 25.6 mm.

More on movements

Sources

Documents checked · Report a wrong number

  1. 1ETA SA Manufacture Horlogère Suisse — Technical Communication CT 2824-2 (11 ½''' ETA 2824-2) · pdf · read
  2. 2Professional Watches — Tissot caliber C07.111 (Powermatic 80) article · html · read
  3. 3Tissot (Swatch Group) — A game-changing watch movement: the Powermatic 80 · html · read
  4. 4CaliberCorner — HK Precision Technology Caliber PT5000 (CaliberCorner) · html · read