Skip to content
WatchtheDetails

Movement · Miyota (Citizen) · automatic

Miyota 9075 movement

Miyota 9075 is an automatic movement by Miyota (Citizen): 11½‴1 in size, 4.92 mm1 high, 241 jewels, beating at 28,800 bph1, 42 h1 of power reserve. 1 watch in our base uses it: Thresher 41mm Dusk (list).

Sources checked · How we source numbers
Miyota 9075: movement drawingMiyota 9075, dial side, to scale: movement diameter — (unknown); size 11½‴; height 4.92 mm; hour, minute, second hand hole Ø — (unknown).movement Ø —11½‴ as printed4.92SIDE · SECTION · height 4.92Ahour, minute, second hand hole Ø —DETAIL A · 10:1
Miyota 9075, dial sideDrawing from data, not a photo · mm

Miyota 9075 at a glance

Diameter
11½‴1
Height
4.92 mm1
Jewels
241
Beat rate
28,800 bph1
Power reserve
42 h1
Accuracy
−10 to +30 s/day1
Lift angle
51°2

New to the terms? Read quartz vs automatic or watch movement types.

Watches with the Miyota 9075

Setting and servicing the Miyota 9075

The figures a watchmaker or a timegrapher needs for the Miyota 9075, as Miyota prints them.

Lift angle
51°2
Accuracy (maker)
−10 to +30 s/day1
Positional difference
30 s/day1
Power reserve
42 h1
Hacking seconds
Yes1
Hand winding
Yes1
Crown turns to full wind
402

What fits the Miyota 9075

The figures a dial, hands or case must match for the Miyota 9075, as Miyota prints them.

Stem part number
065-A052

Same family at Miyota

How each differs from the Miyota 9075, worked out from the figures on its own page.

All Miyota 9075 figures

Every figure we hold for the Miyota 9075, with its source. Where sources disagree, each value is shown.

Size

Size in lignes
11½‴1
Height
4.92 mm1

Running

Jewels
241
Beat rate
28,800 bph1
Power reserve
42 h1
Hands and functions
central GMT hand1
Hacking seconds
Yes1
Hand winding
Yes1
Crown turns to full wind
402

Accuracy and care

Accuracy (maker)
−10 to +30 s/day1
Positional difference
30 s/day1
Lift angle
51°2

Fitting: dial, hands, stem

Stem part number
065-A052
Movement holder part
500-0000M2
Dial screw part
929-8082

Not published yet

  • Hand holes: only in Miyota’s drawing; not read yet
  • Dial feet: not in the documents we read
  • Do not set the date: not in the documents we read

Miyota 9075 questions

Which watches use the Miyota 9075?

1 watch in our base name the Miyota 9075: Thresher 41mm Dusk.

What is the lift angle of the Miyota 9075?

51°, as Miyota prints it. Enter 51° on a timegrapher to read amplitude correctly for the Miyota 9075.

Source [2]

How accurate is the Miyota 9075?

Miyota rates the Miyota 9075 at −10 to +30 s/day, measured under Miyota’s own test conditions; a worn Miyota 9075 can run outside the −10 to +30 s/day range.

Source [1]

How long does the Miyota 9075 run when fully wound?

About 42 h from a full wind, per Miyota; a full hand wind takes about 40 crown turns.

Source [1][2]

Does the Miyota 9075 hack and hand-wind?

Yes, it hacks: the seconds hand stops with the crown pulled out. It can be wound by the crown.

Source [1]

More on movements

Sources

Documents checked · Report a wrong number

  1. 1Citizen Watch Co., Ltd. (MIYOTA) — MIYOTA movement 9075 product page · html · read
  2. 2Citizen Watch Co., Ltd. (MIYOTA) — Spec. sheet (9075) · pdf · read
  3. 3Zelos Watches — Thresher 41mm Dusk product page · html · read